Site icon Daily Bama Blog

How to Maintain Industrial Generator for Easy Operation

How to Maintain Industrial Generator for Easy Operation

When it comes to generator maintenance and operation, too often, we fail to take the time to think about our equipment in an organized manner. Many parts must work together and preserve good working conditions for your generator to run smoothly.

Lack of proper care may lead to unnecessary problems such as running out of gas or experiencing other mechanical issues with poor efficiency and low output. Due to unavoidable circumstances, the generator may fail to function altogether. Since buying a new one is costly and probably your budget does not allow it, it’s advisable to go for Used industrial generator sets to keep the business running.

However, maintenance can prevent you from getting into unexpected expenses you are not prepared for. Here are helpful tips to keep your industrial generator in top condition.

Step 1: Check the Oil

Before starting your generator, make sure the oil level is full. If it is not, add oil until the oil indicator on the dipstick shows that all of the fluid has been added.

If you use oil in your machine, you may need to change this occasionally, so be sure not to leave oil sitting around too long before changing out what’s left over from previous runs of fuel through your generator!

Step 2: Allow the Generator to Run for Sometime

After adding oil, turn on your generator and let it run for several minutes so that it can warm up. Then shut off your generator and wait for it to cool before using it again.

Step 3: Check Damages

During operation, check for leaks by listening to any unusual noises inside your machine. You can stop leaks easily by blowing out any areas with signs of water damage or air bubbles inside the machine’s electric panel area. The next step to maintaining your industrial generator is to inspect it for any damage or wear and ensure it is working properly.

Please ensure no leaks at any part of your generator’s system, such as the fuel pump, belt drive system, or condenser fan motor, by checking each component for leaks with a flashlight and then allowing it to cool before opening them up again later.

Step 4: Replace Worn Out Parts

If necessary, replace worn belts in your drive train and other parts of your industrial generator with new ones so they run more smoothly without fail-safe failures occurring due to wear and tear on your machinery’s parts over time.

Step 5: Keep it Clean

The first thing you should do is keep your generator clean. This will help ensure that any dust or debris doesn’t get into the machine and cause problems down the road. The rust that forms on your generator can be hard to remove and may cause damage to the machine. So, doing it regularly may help your generator along the way.


Like other complicated machines, if you want to ensure a longer performance and life for your generator, you’ll need to keep it in tip-top shape. Thankfully, the process isn’t that complicated, but it will require some dedication and maintenance on your part.

The key is to approach it from both a preventative and proactive mindset. By doing this, you can potentially save yourself thousands of dollars on costly repairs or replacements.

Exit mobile version